6515--Impedance Planimetry System

Page 2 of 2 (i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. (ii) The solicitation number 36C26226Q0861 is issued as a Request for Quotation (RFQ) in conjunction with FAR -- Part 12 Acquisition of Commercial Products and Commercial Services and constitutes the only solicitation. The Government intends to award a single Firm-Fixed Price (FFP) award contract. (iii) The provisions and clauses in this document are in effect through the Revolutionary FAR Overhaul (RFO). (iv) This solicitation intends to award a contract through competition set-aside for Small Businesses associated with NAICS North American Industrial Classification System Code 339112. (v) See Attachment A Schedule of Pricing for a list of product information, line-item numbers, items, quantities and units of measure. (vi) The Department of Veterans Affairs (VA) seeks to make a procurement for an Impedance Planimetry System for the Gastroenterology Department located at VA San Diego Healthcare System. See Attachment B Statement of Work for a listing of salient characteristics and other requirements. Offeror quotations must demonstrate meeting the salient physical, functional, or performance characteristic specified in this solicitation, otherwise it will be considered non-responsive. The information provided is intended to be descriptive, not restrictive and to indicate the quality that will be satisfactory. The interested parties bear full responsibility to ensure their submission demonstrates to the government that they can provide the supplies being requested. (vii) Delivery Requirements: Place of Delivery: Department of Veterans Affairs VA San Diego Medical Center Warehouse Bldg 1 ATTN: Anna Macdonald - Gastroenterology 3350 La Jolla Village Drive San Diego, CA 92161 Period of Performance/Delivery Timeframe: Delivery of the items is expected to be within 30 days After Receipt of Order (ARO). Additional Delivery Requirements All shipping shall be inclusive of prices within the schedule and FOB Destination. (viii) The provision at 52.212-1, Instructions to Offerors Commercial Products and Commercial Services, applies to this solicitation. Addendum: All offeror quotes for this solicitation must be received electronically through email no later than Monday, June 15, 2026, 1:00 PM Pacific Time. Ensure to reference solicitation number 36C26226Q0861 within subject line of the email. Any offeror quotes received after the prescribed date/time shall be considered non-responsive and will not be considered for award. Any questions regarding this solicitation must be received electronically through email no later than Monday, June 8, 2026, 1:00 PM Pacific Time. Offers shall be sent by email to Samuel Han at Samuel.Han@va.gov. Offerors shall submit the following via email: Completed Attachment A Schedule of Pricing Offerors shall fill out all unlocked fill-ins/tabs of Attachment A conforming to requirements stated by the salient characteristics and the instructions below. Offerors shall complete column H of tab 1 for unit prices. Offerors shall additionally complete columns C E of tab 1 with the offered product that meets all salient characteristics found on Attachment B. Attachment B Statement of Work Section B - Salient Characteristics. Offerors must provide clear information/narrative/reference regarding how their product meets each of the salient characteristics in: Attachment B; or alternatively may state where in the offeror s overall submission that information can be found. CLIN prices shall include all shipping and installation costs (no separate shipping and installation fees). Completed Buy American Certificate (see FAR 52.225-2 below) Include reference of Offeror s SAM Unique Entity ID number (UEI) OFFERORS WHO FAIL TO COMPLY WITH THESE QUOTE SUBMITTAL REQUIREMENTS MAY HAVE THEIR OFFERS REJECTED AND BE REMOVED FROM FURTHER CONSIDERATION FOR CONTRACT AWARD. (End of Provision) (ix) 52.212-2 Evaluation -- Commercial Products and Commercial Services (Nov 2021) (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Lowest priced quotation that meets all salient characteristics in Attachment B and additional delivery requirements that is both responsive and responsible. Acceptability of equipment/services shall be established by review of each submitted quotation by the designated evaluator(s) and verification that any items meet the salient characteristics included in this solicitation. Submissions to this solicitation must show clear, compelling and convincing evidence that equal-to items meet all the salient characteristics (see Attachment A and B). Offers that include any items that are not determined to meet all salient characteristics shall result in an unacceptable offer. (b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified with a minimum of at least sixty days, shall result in a binding contract without further action by either party. Before the offer s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of Provision) (x) The clause at 52.212-4, Contract Terms and Conditions -- Commercial Products and Commercial Services, applies to this acquisition. (xi) The following provisions and clauses also apply: 52.222-90 ADDRESSING DEI DISCRIMINATION BY FEDERAL CONTRACTORS (APR 2026) (a) Definitions. As used in this clause Program participation means membership or participation in, or access or admission to: training, mentoring, or leadership development programs; educational opportunities; clubs; associations; or similar opportunities that are sponsored or established by the contractor or subcontractor. Racially discriminatory diversity, equity, and inclusion (DEI) activities means disparate treatment based on race or ethnicity in the recruitment, employment (e.g., hiring, promotions), contracting (e.g., vendor agreements), program participation, or allocation or deployment of an entity's resources. (b) In connection with the performance of work under this contract, the Contractor agrees as follows: (1) The Contractor will not engage in any racially discriminatory DEI activities; (2) The Contractor will furnish all information and reports, including providing access to books, records, and accounts, as required by the Contracting Officer, for purposes of ascertaining compliance with this clause; (3) In the event of the Contractor's or a subcontractor's noncompliance with this clause, this contract may be canceled, terminated, or suspended in whole or in part, and the Contractor or subcontractor may be declared ineligible for further Government contracts; (4) The Contractor will report any subcontractor's known or reasonably knowable conduct that may violate this clause to the Contracting Officer and take any appropriate remedial actions directed by the Contracting Officer; and (5) The Contractor will inform the Contracting Officer if a subcontractor sues the Contractor and the suit puts at issue, in any way, the validity of this clause. (6) The Contractor recognizes that compliance with the requirements of this clause are material to the Government's payment decisions for purposes of 31 U.S.C. 3729(b)(4). (c) The Contractor must include the substance of this clause, including this paragraph (c), in subcontracts at any tier, including those for commercial products and commercial services, except those where the place of delivery or performance is outside the United States. (End of clause) 52.225-1 - � BUY AMERICAN-SUPPLIES (OCT 2022) (a)� Definitions. As used in this clause Commercially available off-the-shelf (COTS) item (1)� Means any item of supply (including construction material) that is (i)� A commercial product (as defined in paragraph (1) of the definition of commercial product at Federal Acquisition Regulation (FAR) 2.101); (ii)� Sold in substantial quantities in the commercial marketplace; and (iii)� Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and (2)� Does not include bulk cargo, as defined in� 46 U.S.C. 40102(4), such as agricultural products and petroleum products. Component� means an article, material, or supply incorporated directly into an end product. Cost of components� means (1)� For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or (2)� For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the end product. Critical component� means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105 . Domestic end product� means (1)� For an end product that does not consist wholly or predominantly of iron or steel or a combination of both- (i)� An unmanufactured end product mined or produced in the United States; (ii)� An end product manufactured in the United States, if- (A)� The cost of its components mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029. Components of foreign origin of the same class or kind as those that the agency determines are not mined, produced, or manufactured in sufficient and reasonably available commercial quantities of a satisfactory quality are treated as domestic. Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic; or (B)� The end product is a COTS item; or (2)� For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of foreign iron and steel constitutes less than 5 percent of the cost of all the components used in the end product. The cost of foreign iron and steel includes but is not limited to the cost of foreign iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the end product and a good faith estimate of the cost of all foreign iron or steel components excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the definition of "cost of components". End product� means those articles, materials, and supplies to be acquired under the contract for public use. Fastener� means a hardware device that mechanically joins or affixes two or more objects together. Examples of fasteners are nuts, bolts, pins, rivets, nails, clips, and screws. Foreign end product� means an end product other than a domestic end product. Foreign iron and steel� means iron or steel products not produced in the United States. Produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, from the initial melting stage through the application of coatings, except metallurgical processes involving refinement of steel additives. The origin of the elements of the iron or steel is not relevant to the determination of whether it is domestic or foreign. Predominantly of iron or steel or a combination of both� means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners. Steel� means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements. United States� means the 50 States, the District of Columbia, and outlying areas. (b)� 41 U.S.C. chapter 83, Buy American, provides a preference for domestic end products for supplies acquired for use in the United States. In accordance with� 41 U.S.C. 1907, the domestic content test of the Buy American statute is waived for an end product that is a COTS item, except that for an end product that consists wholly or predominantly of iron or steel or a combination of both, the domestic content test is applied only to the iron and steel content of the end product, excluding COTS fasteners. (c)� Offerors may obtain from the Contracting Officer a list of foreign articles that the Contracting Officer will treat as domestic for this contract. (d)� The Contractor shall deliver only domestic end products except to the extent that it specified delivery of foreign end products in the provision of the solicitation entitled "Buy American Certificate." (End of clause) 52.225-2� BUY AMERICAN CERTIFICATE (OCT 2022) (a)� (1)� The� Offeror� certifies that each� end product, except those listed in paragraph (b) of this provision, is a domestic� end product� and that each domestic� end product� listed in paragraph (c) of this provision contains a critical� component. (2)� The� Offeror� shall� list as foreign� end products� those� end products� manufactured in the� United States� that do not qualify as domestic� end products. For those foreign end� products� that do not consist wholly or predominantly of iron or steel or a combination of both, the� Offeror� shall� also indicate whether these foreign� end products� exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select no . (3)� The� Offeror� shall� separately list the� line item numbers� of domestic� end products� that contain a critical� component� (see FAR� 25.105). (4)� The terms commercially available off-the-shelf (COTS) item, critical� component, "domestic� end product," "end product," and "foreign� end product" are defined in the clause of this� solicitation� entitled "Buy American-Supplies." (b)Foreign� End Products: Line Item� No. Country of Origin Exceeds 55% domestic content (yes/no) ______________ _________________ _________________ ______________ _________________ _________________ ______________ _________________ _________________ (b)[List as necessary] (c)� Domestic� end products� containing a critical� component: Line Item� No.� ___ [List as necessary] (d)� The Government will evaluate� offers� in accordance with the policies and procedures of� part� 25� of the Federal� Acquisition� Regulation. (End of provision) 52.240-90 SECURITY PROHIBITIONS AND EXCLUSIONS REPRESENTATIONS AND CERTIFICATIONS (NOV 2025) (DEVIATION) (a) Definitions. As used in this provision Backhaul, covered article, covered telecommunications equipment or services, critical technology, FASCSA order, Intelligence community, interconnection arrangements, national security system, roaming, sensitive compartmented information, sensitive compartmented information system, source, and substantial or essential component have the meanings provided in the clause 52.240-91, Security Prohibitions and Exclusions. Business operations means engaging in commerce in any form, including by acquiring, developing, maintaining, owning, selling, possessing, leasing, or operating equipment, facilities, personnel, products, services, personal property, real property, or any other apparatus of business or commerce. Marginalized populations of Sudan means (1) Adversely affected groups in regions authorized to receive assistance under section 8(c) of the Darfur Peace and Accountability Act (Pub. L. 109-344) (50 U.S.C. 1701 note); and (2) Marginalized areas in Northern Sudan described in section 4(9) of such Act. Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate (1) Are conducted under contract directly and exclusively with the regional government of southern Sudan; (2) Are conducted under specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization; (3) Consist of providing goods or services to marginalized populations of Sudan; (4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization; (5) Consist of providing goods or services that are used only to promote health or education; or (6) Have been voluntarily suspended. Sensitive technology (1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically (i) To restrict the free flow of unbiased information in Iran; or (ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and (2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)). (b) Procedures. (1) Covered telecommunications and video surveillance. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) at https://www.sam.gov for entities excluded from receiving federal awards for covered telecommunications equipment or services. (2) FASCSA Orders. (i) The Offeror shall search in SAM for the phrase FASCSA order for any covered article, or any products or services produced or provided by a source, if there is an applicable FASCSA order described in paragraph (e) of FAR 52.240-91, Security Prohibitions and Exclusions. (ii) The Offeror shall review the solicitation for any FASCSA orders that are not in SAM but are effective and apply to the solicitation and resultant contract (see FAR 40.204-1(c)(2)). (iii) FASCSA orders issued after the date of solicitation do not apply unless added by an amendment to the solicitation. (c) Covered telecommunications equipment or services representations. By submission of its offer, the Offeror represents that, after conducting a reasonable inquiry (that looks at any information in the Offeror s possession but does not need to include an internal or third-party audit) (1) It will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation, except as waived by the solicitation, or as disclosed in paragraph (g); and (2) It does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services, except as waived by the solicitation, or as disclosed in paragraph (g). (d) FASCSA Representation. By submission of this offer, the offeror represents that it has conducted a reasonable inquiry, and that the offeror does not propose to provide or use in response to this solicitation any covered article, or any products or services produced or provided by a source, if the covered article or the source is prohibited by an applicable FASCSA order in effect on the date the solicitation was issued, except as waived by the solicitation, or as disclosed in paragraph (g). A reasonable inquiry will look at any information in the offeror s possession but does not need to include an internal or third-party audit. (e) Sudan certification. By submission of its offer, the offeror certifies, after conducting a reasonable inquiry (that looks at any information in the offeror s possession but does not need to include an internal or third-party audit), that the offeror does not conduct any restricted business operations in Sudan. (f) Iran Representation and Certifications. (1) Except as provided in paragraph (f)(2) of this provision or if a waiver has been granted in accordance with FAR 40.203-3, the offeror, after conducting a reasonable inquiry (that looks at any information in the offeror s possession but does not need to include an internal or third-party audit), by submission of its offer (i) Represents, to the best of its knowledge and belief, that the offeror does not export any sensitive technology to the government of Iran or any entities or individuals owned or controlled by, or acting on behalf or at the direction of, the government of Iran; (ii) Certifies that the offeror, or any person (as defined at section 15 of the Iran Sanctions Act of 1996, Pub. L. 104-172, 50 U.S.C. 1701 note) owned or controlled by the offeror, does not engage in any activities for which sanctions may be imposed under section 5 of the Act. These sanctioned activities are in the areas of development of the petroleum resources of Iran, production of refined petroleum products in Iran, sale and provision of refined petroleum products to Iran, and contributing to Iran s ability to acquire or develop certain weapons or technologies; and (iii) Certifies that the offeror, and any person owned or controlled by the offeror, does not knowingly engage in any transaction that exceeds $15,000 with Iran s Revolutionary Guard Corps or any of its officials, agents, or affiliates, the property and interests in property of which are blocked pursuant to the International Emergency Economic Powers Act (50 U.S.C. 1701 et seq.) (see OFAC s Specially Designated Nationals and Blocked Persons List at https://www.treasury.gov/resource-center/sanctions/SDN-List/Pages/default.aspx) (2) Exception for trade agreements. The representation and certification requirements of paragraph (f)(1) of this provision do not apply if (i) This solicitation includes a trade agreements notice or certification (e.g., 52.225-6, Trade Agreements Certificate); and (ii) The offeror has certified that all the offered products to be supplied are designated country end products or designated country construction material. (iii) The offeror shall email questions concerning sensitive technology to the Department of State at CISADA106@state.gov. (g) Disclosure. (1) If the Offeror is not able to represent compliance with the prohibitions in paragraphs (c) or (d), then the Offeror shall disclose within 72 hours to the contracting office identified in paragraph (g)(2) the following information for each product or service not compliant: (i) Contract number and order number, if applicable; (ii) Identification of whether this disclosure relates to paragraph (c) on covered telecommunication equipment or services, or to paragraph (d) on FASCSA orders; (iii) A description of the products or services that the Contractor identifies or has reason to suspect is prohibited (include brand; model number, such as the original equipment manufacturer (OEM) number, manufacturer part number, or wholesaler number; and item description, as applicable); (iv) The entity that produced the product or service (include entity name, unique entity identifier, Contractor and Government Entity (CAGE) code, facilities responsible for design, fabrication, assembly, packaging, and test of the product, and whether the entity was the OEM or a distributor (provide manufacturer codes and distributor codes used for the product)); (v) Description of the functionality of the product or service and how that functionality impacts the risk to the product or service; (vi) An explanation of any factors relevant to determining if the product or service should be permitted by an applicable exception, exemption, or waiver (if the offeror would like the Government to consider a waiver); (vii) Whether alternative products or services are available that would be compliant with the prohibition; (viii) If the product or service is related to item maintenance, include the following information on the item being maintained: (A) Brand; (B) Model number, OEM number, manufacturer part number, or wholesaler number; and (C) Item description, as applicable. (ix) Any readily available information about mitigation actions undertaken or recommended. (2) If a disclosure is required to be submitted to a contracting office, the offeror shall submit the disclosure as follows: (i) If a Department of Defense contracting office, the offeror shall submit the disclosure to the website at https://dibnet.dod.mil. (ii) For all other contracting offices, the Offeror shall submit the disclosure to the Contracting Officer. (3) If the disclosure provided does not contain any of the information required by paragraph (1), and the Offeror later discovers new information that is required by paragraph (1), then the Offeror shall submit a subsequent disclosure within 72 hours of discovering the new information. (h) Executive agency review of disclosures. The Contracting Officer will review disclosures provided in paragraph (g) to determine if any applicable waiver may be sought. The Contracting Officer may choose not to pursue a waiver and may instead make an award to an Offeror that does not require a waiver. (End of Provision) 52.240-91 SECURITY PROHIBITIONS AND EXCLUSIONS (NOV 2025) (DEVIATION) (a) Definitions. As used in this clause American Security Drone Act-covered foreign entity means an entity included on a list that the Federal Acquisition Security Council (FASC) develops and maintains and publishes in the System for Award Management (SAM) at https://www.sam.gov (section 1822 of Pub. L. 118-31, 41 U.S.C. 3901 note prec.). Backhaul means intermediate links between the core network, or backbone network, and the small subnetworks at the edge of the network (e.g., connecting cell phones/towers to the core telephone network). Backhaul can be wireless (e.g., microwave) or wired (e.g., fiber optic, coaxial cable, Ethernet). Covered application means the social networking service TikTok or any successor application or service developed or provided by ByteDance Limited or an entity owned by ByteDance Limited. Covered article, as defined in 41 U.S.C. 4713(k), means: (1) Information technology, as defined in 40 U.S.C. 11101, including cloud computing services of all types; (2) Telecommunications equipment or telecommunications service, as those terms are defined in section 3 of the Communications Act of 1934 (47 U.S.C. 153); (3) The processing of information on a Federal or non-Federal information system, subject to the requirements of the Controlled Unclassified Information program (see 32 CFR part 2002); or (4) Hardware, systems, devices, software, or services that include embedded or incidental information technology. Covered foreign country means The People s Republic of China. Covered telecommunications equipment or services means (1) Telecommunications equipment produced by Huawei Technologies Company or ZTE Corporation (or any subsidiary or affiliate of such entities); (2) For the purpose of public safety, security of Government facilities, physical security surveillance of critical infrastructure, and other national security purposes, video surveillance and telecommunications equipment produced by Hytera Communications Corporation, Hangzhou Hikvision Digital Technology Company, or Dahua Technology Company (or any subsidiary or affiliate of such entities); (3) Telecommunications or video surveillance services provided by such entities or using such equipment; or (4) Telecommunications or video surveillance equipment or services produced or provided by an entity that the Secretary of Defense, in consultation with the Director of National Intelligence or the Director of the Federal Bureau of Investigation, reasonably believes to be an entity owned or controlled by, or otherwise connected to, the government of a covered foreign country. Critical technology means (1) Defense articles or defense services included on the United States Munitions List set forth in the International Traffic in Arms Regulations under subchapter M of chapter I of title 22, Code of Federal Regulations; (2) Items included on the Commerce Control List set forth in Supplement No. 1 to part 774 of the Export Administration Regulations under subchapter C of chapter VII of title 15, Code of Federal Regulations, and controlled (i) Pursuant to multilateral regimes, including for reasons relating to national security, chemical and biological weapons proliferation, nuclear nonproliferation, or missile technology; or (ii) For reasons relating to regional stability or surreptitious listening; (3) Specially designed and prepared nuclear equipment, parts and components, materials, software, and technology covered by part 810 of title 10, Code of Federal Regulations (relating to assistance to foreign atomic energy activities); (4) Nuclear facilities, equipment, and material covered by part 110 of title 10, Code of Federal Regulations (relating to export and import of nuclear equipment and material); (5) Select agents and toxins covered by part 331 of title 7, Code of Federal Regulations, part 121 of title 9 of such Code, or part 73 of title 42 of such Code; or (6) Emerging and foundational technologies controlled pursuant to section 1758 of the Export Control Reform Act of 2018 (50 U.S.C. 4817). FASC-prohibited unmanned aircraft system means an unmanned aircraft system manufactured or assembled by an American Security Drone Act covered foreign entity. FASCSA order means any of the following orders issued under the Federal Acquisition Supply Chain Security Act (FASCSA) requiring removing covered articles from executive agency information systems or excluding one or more named sources or named covered articles from executive agency procurement actions, as described in 41 CFR 201-1.303(d) and (e): (1) The Secretary of Homeland Security may issue FASCSA orders that apply to civilian agencies, to the extent not covered by paragraph (2) or (3) of this definition. This type of FASCSA order may be referred to as a Department of Homeland Security (DHS) FASCSA order. (2) The Secretary of Defense may issue FASCSA orders that apply to the Department of Defense (DoD) and national security systems other than sensitiv...